Nokia 9000i Communicator - Printing

background image

Printing

Documents can be directly printed in Notes only.
Printing is possible only to a printer that has an
IrDA compatible infrared port. To print to other
printers, transfer the file to a PC, as described in
chapter 10 "System: File transfer" on page 10-6.

Please refer to the User’s Guide of the printer for
detailed safety instructions on the device.

To establish an infrared serial connection:

Make sure that the communicator’s infrared
port faces the infrared port of the printer.
Keep the infrared connection clear. In the
event the infrared connection is obstructed
for too long (for example, something is moved
between the infrared sensors or the commu-
nicator is moved), printing is interrupted.

background image

8-4

Notes settings

1998 Nokia Mobile Phones. All Rights Reserved.

To print a document:

Open the document, press Print/Send and se-
lect Print.

For information on the supported printers, read
the readme.txt file on the diskette supplied in the
communicator sales package, or see the Club.No-
kia home page in the World Wide Web (found at
the address http://www.club.nokia.com).

More printer drivers can be installed with the In-
stall/Remove software application under System.

After the communicator has checked that you do
not already have an active PC connection, it
starts to scan for a printer. This means that you
cannot print while you are, for example, transfer-
ring files from the communicator to a PC. If the
printer cannot be found, a failure note is shown
and the editor view returns. If the correct printer
is found, the printer driver is selected automati-

cally and the printing view shows the name of
the document and the selected printer.

Press Start to start printing.