First start-up
When you activate the communicator interface
after having removed and replaced the battery,
you will always see first a welcome screen while
the device performs a self-test. The following
steps, however, will be shown only during the
first, personalisation, start-up.
1
If you have not already installed your SIM
card, install it, as described in ”SIM card” on
page 2-2, and switch on the phone interface.
If you do not have a SIM card yet, go to the
next step (see the section ”SIM card contents”
on page 2-2).
Although you do not need a SIM card to use the
communicator interface, a SIM card is required
to send and receive calls and documents.
2
Open the cover.
3
Select your home country from the list by
scrolling the selection frame over it with the
scroll keys on the left of the display. Press the
button on the right of the display next to the
command OK. The capital of your home coun-
try will be set as your home city. You can
2-2
SIM card
1998 Nokia Mobile Phones. All Rights Reserved.
change your home city later in the Clock ap-
plication, see chapter 11 "Extras: Clock" on
page 11-3.
4
Accept or change the date shown and press
OK. If you change the date, use the format
dd.mm.yy (for example, 24.08.97). You can
later change the date format in the System
settings. (Time and date can be changed in
the Clock application’s settings.)
5
Accept or change the time shown and press OK.
If you change the time, use the 24-hour format
hh:min (for example, 17:25). You can later
change the time format in the System settings.
6
Enter user data and press OK. You can later
change the information in the System appli-
cation’s User data view.
The personalisation procedure is now completed.