Alarm clock
The Alarm clock is activated with the Alarm
clock command in the Clock main view. The
alarms will occur according to the home city
time (note this when in a different time zone, e.g.
when travelling abroad).
An alarm can be set to occur within the next 24
hours. Alarms that occur later than this are set in
the Calendar application.
%
percent calculation
( )
parenthesis
= or Enter
sum
C
clears the entry field
Figure 11-2
11-4
Clock
1998 Nokia Mobile Phones. All Rights Reserved.
To set an alarm:
1
Press + or - to adjust the time shown in the
alarm clock display. Each press changes the
time by one minute, but if you hold the but-
ton down a while longer, the time will start to
change in steps of 15 minutes.
2
Press OK to accept the set alarm.
There can only be one active alarm. If an alarm is
already active, the command names are differ-
ent. A counter on the lower right side of the
screen shows how much time remains to the
time of the alarm.
Press Change alarm time if you want to readjust
the time of the alarm.
Press Delete alarm to cancel the alarm.
When the alarm sounds, it can be turned off by
pressing any phone interface or communicator
interface key.
If the alarm is not turned off, or it is turned off
by pressing other than the OK button on the
Communicator display, the alarm will sound five
more times or until you press the OK button.
Note that if the alarm interval is set to zero, the
alarm will sound only once. Set the alarm inter-
val in the clock settings.